Sd.Kfz.251/4 Ausf.C
| GENERAL DATA | |||
| Other Designation(s) | mittlere Schützenpanzerwagen
(IG) (Sd.Kfz.251/4) Ausf.C, Gerät 904 |
||
| Type | Ammunition carrier/Artillery Tractor |
Radio Equipment | FuG Spr Ger f |
| Manufacturer(s) | Hanomag, MNH,
Schichau Wumag, Weserhütte, Borgward |
||
| Crew | 7 |
||
| Production Quantity | 4650 (total Sd.Kfz.251 Ausf.A/B/C) |
Production Period | June 1939 - September 1943 |
| DIMENSIONS | |||
| Combat weight | 8750 kg |
Ground pressure | ? kg/cm² |
| Length w/Gun | - |
Length /hull | 5.8 m |
| Barrel Overhang | - |
Height | 1.75 m |
| Width | 2.1 m |
Ground clearance | 0.30 m |
| ARMAMENT | |||
| Primary Armament | 1 x 7.92 mm MG 34 or 42 (1) |
Ammunition Carried | 1100 |
| Traverse | manual |
Elevation | manual |
| Traverse speed (360°) | - |
Sight | - |
| Secondary Armament | - |
Ammunition Carried | - |
| Location | 1: superstructure front |
||
| ARMOR | ||||
| Assembly | Welding & bolting
|
|||
| Armor Detail | Front |
Side |
Rear |
Top/Bottom |
| Lower Hull | 14.5 mm / 68° |
8 mm / 55° |
8 mm / 50° |
6 mm / 0° |
| Upper Hull | 10 mm /
57° |
8 mm / 55° |
8 mm / 60° |
6 mm / 0°
& Open |
| AUTOMOTIVE | |||
| Engine | Maybach HL 42 TUKRM |
Type & Displacement | 6 in line |
| Horsepower (maximum) | 100 hp at 2800 rpm |
Power/Weight Ratio | 11.42 hp / ton |
| Gearbox | Schub: 4 forward, 1 reverse. |
Steering | Front-Wheels and tracks steering wheel and levers |
| Brakes | ? |
Fuel Capacity | 160 L Gasoline (Petrol) |
| SUSPENSION | |||
| Type | Wheels: Trans Leaf
Spring Tracks: Torsion bar |
Road wheels | 2 at front w/pneumatic 6 at rear w/rubber edgings |
| Track return rollers | - |
Sprocket-Wheels | Front |
| Idler Sprockets | Rear w/rubber edgings |
Shock absorbers | ? |
| Track Type | center & extruded guide, steel with rubber pads | ||
| Width | 280 mm |
Pitch | ? mm |
| Links(shoes) | 56 |
Track ground contact | 1.8 m |
| PERFORMANCES | |||
| Maximum Speed | 53 km/h on road, 20 km/h off road |
Range | 300 km on road, 150 km off road |
| Mileage | ? L/100 km on road |
Maximum grade | 24° (from horizontal) |
| Trench crossing | 0 2 m |
Vertical obstacles | 0.80 m |
| Maximum fording depth | 0.5 m |
Minimum turning diameter | 13.5 m |
| Sources | |||
| Vehicles.com | TNT HS n°1, 2, 4, 7, 8, 11, 12 |
||
Drawings |
File |
